SPF Roofing Fort Lauderdale & South Florida
Get Your Free Quote
SPF Spray Foam Roofing Specialists Across South Florida
SPF (Spray Polyurethane Foam) is a spray-applied, seamless roofing system that expands on contact to insulate and waterproof flat and low-slope roofs in a single layer. Lionz Roofing installs, recoats, and repairs SPF systems — from minor coating touch-ups to full replacement — across Miami, Fort Lauderdale, Boca Raton, and Palm Beach, engineered to meet Florida Building Code wind-uplift requirements and backed by a workmanship guarantee.
- Licensed & Insured in Florida
- Free Estimates — No Obligation
- Residential & Commercial Systems
SPF Roofing Installation: $10–$20 per sq. ft. installed
Final pricing is determined after a free on-site inspection. Actual cost depends on roof size, material, extent of damage, and other job-specific factors.
SPF Roofing Services
The Benefits Of SPF Roofing
SPF is unmatched among flat-roof systems for its seamless application and insulation value — sprayed directly onto the roof, it expands to eliminate the seams and joints that other membranes rely on, while cutting cooling costs across Miami-Dade, Broward, and Palm Beach counties.
Every SPF system we install is inspected, coated, and verified before handover — backed by manufacturer warranties and our own workmanship guarantee, on residential and commercial roofs alike.
- Fully seamless — no seams or joints for water to work through
- Highest insulation (R-value) of any roofing system, cutting cooling costs
- Sprays directly over irregular rooflines, curves, and existing roofs
- Lightweight, self-flashing around vents, pipes, and equipment
- Re-coatable every 10–15 years to extend the roof's life indefinitely
- Strong wind-uplift performance for hurricane-prone South Florida roofs
Ideal Uses For SPF On Flat & Low-Slope Roofs
Commercial & Industrial Rooftops
A common fit for warehouses, distribution centers, and industrial buildings where insulation and energy savings matter as much as waterproofing.Roofs With Irregular Shapes
Spray-applied foam conforms to curves, slopes, and odd rooflines that sheet membranes can't cover without extra seams.HVAC & Equipment-Heavy Roofs
Self-flashing foam seals cleanly around rooftop units, pipes, and penetrations common on commercial and multifamily properties.Energy-Conscious Retrofits
A strong choice for property owners across Fort Lauderdale, Miami, and Boca Raton looking to cut cooling costs on an aging flat roof.TPO vs. EPDM vs. SPF Roofing Comparison
| Feature | TPO | EPDM | SPFYou're Here |
|---|---|---|---|
| Cost | $10–$20 per sq. ft. installed | $10–$20 per sq. ft. installed | $10–$20 per sq. ft. installed |
| Lifespan | 20–25+ years | 20–30 years | 20–30+ years, extendable via recoat |
| Seams | Heat-welded seams | Sealed seams | Seamless (spray-applied) |
| Insulation & Energy Efficiency | Highly reflective, cuts cooling costs | Moderate — dark membrane | Highest R-value of any system |
| Best For | Cost + reflectivity balance | Budget-friendly durability | Irregular rooflines, max insulation |
| Maintenance | Seam & flashing checks | Seam & flashing checks | Recoat every 10–15 years |
| Hurricane Code | Meets FL Building Code wind-uplift requirements | Meets FL Building Code wind-uplift requirements | Meets FL Building Code wind-uplift requirements |
Our SPF Roofing Installation Process
Inspection & Measurement
Every installation starts with a free on-site inspection and measurement of your roof's slope, drainage, and existing deck or substrate condition.
Substrate Preparation
We clean and prep the existing surface so the foam bonds properly, or complete a full tear-off if the substrate isn't sound.
Foam Spray Application
SPF is spray-applied in multiple passes to the specified thickness, expanding to form a seamless, fully-adhered insulating layer across the entire roof.
Protective Coating & Final Inspection
A protective elastomeric coating is applied over the foam for UV and weather protection, followed by a final inspection to confirm coverage and drainage.
SPF Maintenance & Lifespan In South Florida
10–15 Year Recoat Cycle
A protective recoat every 10–15 years keeps the underlying foam sealed and can extend an SPF roof's life indefinitely.Biannual Inspections
We recommend a visual inspection twice a year — once before hurricane season and once after.Coating Wear Checks
We check the elastomeric coating for UV wear and thinning, since it's what protects the foam layer beneath it.Foam Integrity & Moisture Monitoring
We flag any signs of moisture intrusion or foam damage early, before it affects insulation performance or leads to a larger repair.Not sure SPF is the right fit? We also install metal roofing for pitched roofs, handle roof repairs of all kinds, and offer gutter services to keep your flat-roof drainage system performing alongside your new foam roof.
SPF Roofing Across South Florida
We install, recoat, and repair SPF roofing systems for homes, condominiums, and commercial buildings throughout Broward, Miami-Dade, and Palm Beach counties.
Residential Roofing
New installations, repairs, or full replacements — we handle every roofing project across South Florida with care, precision, and long-lasting craftsmanship.
Learn More →Commercial Roofing
High-quality commercial roofing systems engineered for durability and performance in South Florida, including Miami, Fort Lauderdale, Palm Beach, and surrounding areas.
Learn More →Roof Replacements
Lionz Roofing specializes in code-compliant roof replacement services using Miami-Dade–approved materials built for long-term durability and energy efficiency.
Learn More →Roof Repairs
Get fast, reliable roof repairs for leaks, storm damage, and wear — proudly serving businesses and properties in Miami, Hollywood, Palm Beach, and Boca Raton.
Learn More →Gutter Works
Lionz Roofing provides professional gutter installation, repair, and replacement services designed to handle intense rainfall, high winds, and debris buildup common throughout Miami-Dade, Broward, and Palm Beach counties.
Learn More →Frequently Asked Questions
Have questions about our roofing services? Find answers to the most common questions below, or reach out to our team directly.
SPF (Spray Polyurethane Foam) roofing is a spray-applied system that expands on contact to form a seamless, fully-adhered layer of foam insulation, topped with a protective elastomeric coating. It's valued for having the highest insulation value of any roofing system along with a seamless, self-flashing application.
SPF performs well on both, but it's especially popular on commercial and industrial buildings where insulation and energy savings matter alongside waterproofing. On homes, it's a strong fit for flat or low-slope sections and roofs with irregular shapes. We assess your roof's slope, drainage, and use before recommending a system.
SPF roofing typically runs $10–$20 per sq. ft. installed, depending on roof size, foam thickness, drainage design, and the number of penetrations or roof-line details. Final pricing is determined after a free on-site inspection. Actual cost depends on roof size, material, extent of damage, and other job-specific factors.
A properly installed and maintained SPF roof can last 20–30+ years in South Florida. Because the protective coating is recoated every 10–15 years rather than the whole system being replaced, SPF roofs can effectively be extended indefinitely with routine maintenance.
SPF offers the best insulation value and a seamless application that conforms to irregular rooflines. TPO offers the best balance of cost and heat reflectivity for standard flat and low-slope roofs. EPDM (rubber membrane) is a durable, lower-cost option where reflectivity is less of a priority. We recommend the right system after inspecting your roof's slope, drainage, and use.
Yes. We install SPF systems engineered to meet Florida Building Code wind-uplift requirements for Miami-Dade, Broward, and Palm Beach counties, including HVHZ (High-Velocity Hurricane Zone) areas where applicable.
In many cases, yes — SPF's spray-applied nature makes it well suited to recover applications over an existing roof if the substrate is dry and structurally sound. If there's trapped moisture or deteriorated decking, a full tear-off is the safer option. We determine which applies during a free on-site inspection.
Most residential SPF roofs are completed in 1–2 days. Commercial and industrial SPF projects take longer depending on square footage, and are often phased to minimize disruption to tenants or business operations.
Areas We Serve
Roofing Services Across South Florida
Lionz Roofing serves homeowners and businesses throughout Broward, Miami-Dade, and Palm Beach counties.
Get An SPF Roof Built To Last
Lionz Roofing installs, recoats, and repairs SPF roofing systems for residential and commercial properties across Miami, Fort Lauderdale, Boca Raton, Hollywood, and Palm Beach. Free estimates available.
Our Blog & Articles
Learn about SPF roofing systems, maintenance tips, and energy efficiency for South Florida properties.
Standing Seam vs. Metal Shingle: Which System Fits Your Fort Lauderdale-Area Home?
Standing seam or metal shingle roofing? Compare cost, lifespan, and hurricane performance for Fort Lauderdale-area homes. Free estimates.
Read More
Metal Roofing in South Florida: The Complete 2026 Guide for Homeowners
Thinking about a metal roof in South Florida? See costs, wind ratings, and lifespan, plus why homeowners are switching to metal. Free estimates.
Read More
Aventura Roof Protection: Preparing Your Home for South Florida Storms
Aventura homeowners: prepare your roof for hurricane season with this HVHZ-compliant guide covering inspections, materials, and storm-ready tips.
Read More